|
Snap Mount™ -
Fits all standard mirror stems. Has a 2" rod to platform height.
 |
|
Snap Mount-Pro™
- Fits all standard mirror stems. Pro offset linkage allows
for 2"of additional vertical adjustment and up to 3"
of lateral placement.
|
|
Small-Rod™ -
Fit from 10mm through 15mm and 1/2" rods. They have a 2" rod
to platform height. The angled bar version has a 2" offset
and a 2 ½" rod to platform height.
|
|
Small Rod-Pro™
- Fit from 10mm through 15mm and 1/2" rods. Pro offset linkage
allows for 2"of additional vertical adjustment and up
to 3" of lateral placement.
|
|
Bar Mount - 7/8"
models fit all standard bars. The 1" models fit Harley
and bars up to 1 1/4". They have an average of 2" bar
to platform height. The angled bar versions have a 2" offset
and a 2 ½" bar to platform height.
|
|
Bar-Pro Mounts -
Fit the same bar sizes as the standard Bar Mount but 7/8"
models fit all standard bars. The 1" models fit Harley
and bars up to 1 1/4". They have an average of 2" bar
to platform height. The angled bar versions have a 2" offset
and a 2 ½" bar to platform height. |
|
| Fork Mount - Attaches
onto the top of the stationary portion of fork tubes. Has
a 2" offset and a 2 ½" bar to platform height. Great for mounting
instruments off to the side |
|
Fork-Pro - Attaches
onto the top of the stationary portion of fork tubes. Has
a 2" offset and a 2 ½" bar to platform height. Great for mounting
instruments off to the side |
|
| Pro-Cap Mount - Attaches
onto the top of the stationary portion of fork tubes. Has
a 2" offset and a 2 ½" bar to platform height. Great for mounting
instruments off to the side |
|
Cast Bar-Pro - Attaches
onto the top of the stationary portion of fork tubes. Has
a 2" offset and a 2 ½" bar to platform height. Great for mounting
instruments off to the side |
|
Hub Mount - Fits
7/8" and 1" bar that use two 6mm bolts on lever assembly.
Has a 2" body to platform height.
|
|
Cockpit Mount™ /
Hub-Pro - Fits 7/8" and 1" bar that use two 6mm bolts
on lever assembly. Pro assembly on top provides extra height
and placement adjustment. Has up to 4" body to platform height
and 2" offset. |
|
Stem Pro I & II -
Attaches into 5/8" to ¾" stem opening. Has a 2"
offset and a 4" base to platform height. Ideal for bikes with
an open steering stem.
|
|
Dash Single & Twin
Flex - The Single-Flex Attaches Attaches with high bond
tape and has a 2" dash to platform height. Base diameter 1
3/4". Ideal for level or almost level surfaces. The Twin-Flex
also uses high bond tape and has a 1 1/2" dash to platform
height. Base diameter 1 1/2"x 1". Ideal for inclined surfaces.
|
|
| Rally Mount Option
- Attaches onto Hub or Pro model mounts for a second instrument
platform. Has a 4" offset and a 2 ½" bar to platform height.
First image has a Rally Mount Option attached to a Hub Mount
and the second image has the Rally Option attached to a Boss-Pro
mount. |
|
|
Please
use your browser's back arrow or select from below.
|
